Menu
.downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/mikrotik/ and I guess I need to download the openwrt-15.05.1-ar71xx-mikrotik-vmlinux.bin package? What partition do I need to install the firmware on? Currently I have those: routerboard, hard_config, bios, soft_config, booter, kernel, rootfs.). As asked by few friends, i thoughts its a good idea to share it with all. Last Update: 5th March, 2015, 08:43 am 1- Whatis Metarouter 2- Howto install Metarouter in Mikrotik Routerboard 3- Howto install APACHE web server in METAROUTER to host your web files. 4- Howto install ASTERISK 1.8 with GUI [Feb.
i want to install Openwrt on my MikroTik RouterBOARD RB750gr2
if you can install please big
also you have to teach me how to install it
f you did not do it before plz dont bid
i dont have time to you test
Thank You
Outline your proposal
It's free to sign up and bid on jobs
3 freelancers are bidding on average $38 for this job
ProfSoftStudio++ This is my job. I'm ready to begin now. Pm for me. Thanks Looking forward to hear from you, Feel free to talk about this interesting stuff, give us any questions you have to know more about us ;-) Thanks Oleg!
(20 Reviews)
ajaypatel2784Hi there, I should be able to help you with Openwrt install let me know what would be best time to start. Thank you
(2 Reviews)
neonecosystemHello, Greetings! How are you? I am expert Ubuntu 16.04 LTS Xenial Xerus system admin for setup. I can start now. Just give me your SSH access. Thanks & Regards, Rahaman [login to view URL]
(1 Review)
Need to hire a freelancer for a job?
It's free to sign up, type in what you need & receive free quotes in seconds
This PR adds support for the Mikrotik RouterBOARD rbm33g.
The RBM33g is a mt7621 based device featureing three gigabit ports, 2 miniPCIe slots with simcard sockets, 1 M.2 slot, 1 USB 3.0 port and a male onboard RS-232 serial port. Additionally there are a lot of accessible GPIO ports and additional buses like i2c, mdio, spi and uart.
Flash
The device has two spi flash chips. The first flash chips is rather small (512 kB), connected to CS0 by default and contains only the RouterBOOT bootloader and some factory information (e.g. mac address).
The second chip has a size of 16 MB, is by default connected to CS1 and contains the firmware image.
The second chip has a size of 16 MB, is by default connected to CS1 and contains the firmware image.
Ethernet: ✔️
miniPCIe:✔️
USB 3.0:✔️
M.2: ? (Probably working but untested)
miniPCIe:
USB 3.0:
M.2: ? (Probably working but untested)
Prerequisites
A USB -> RS-232 Adapter and a nullmodem cable are required for installation.
To install an OpenWRT image to the device two components must be built:
- A factory initramfs image
- A openwrt sysupgrade image
initramfs & sysupgrade image
Select target device
Mikrotik RBM33G
in openwrt menuconfig and build the images. This will create the images openwrt-ramips-mt7621-mikrotik_rbm33g-initramfs-kernel.bin
and openwrt-ramips-mt7621-mikrotik_rbm33g-squashfs-sysupgrade.bin
in the output directory.Installing
Make sure to back up your RouterOS license in case you do ever want to go back to RouterOS using
/system license output
and back up the created license file.Serial settings: 115200 8N1
The installation is a two-step process. First the
openwrt-ramips-mt7621-mikrotik_rbm33g-initramfs-kernel.bin
must be booted via tftp:- Set up a dhcp server that points the bootfile to tftp server serving the
openwrt-ramips-mt7621-mikrotik_rbm33g-initramfs-kernel.bin
initramfs image - Connect to WAN port (left side, next to LEDs and power indicator)
- Connect to serial port of board
- Power on board and enter RouterBOOT setup menu
- Set boot device to
boot over ethernet
- Set boot protocol to
dhcp protocol
(can be omitted if DHCP server allows dynamic bootp) - Save config
- Wait for board to boot via Ethernet
On the serial port you should now be presented with the OpenWRT boot log. The next steps will install OpenWRT persistently.
- Copy
openwrt-ramips-mt7621-mikrotik_rbm33g-squashfs-sysupgrade.bin
to the device using scp. - Write openwrt to flash using
sysupgrade openwrt-ramips-mt7621-mikrotik_rbm33g-squashfs-sysupgrade.bin
Once the flashing completes reboot the router and let it boot from flash. It should boot straight to OpenWRT.